![]() ![]() Simultaneous maximum torque and maximum speed is NOT recommended.Motors should be operated at less than 30% of rated performance for the first hour of operation.Minimum oil viscosity should be 100 SUS.Filtration level per ISO Cleanliness Code level 18/3.Maximum operating temperature should not exceed 190☏ (90☌) Flowfit has a vast range of Hydraulic Motors Call us today on 01584 876438 Including Flowfit Hydraulic Motor 51.7 cc/rev SAE 1 inch 6B Splined Shaft, 2 Hole Mount, High Pressure Seal.Normal oil operating temperature should be 70° to 150☏ (20° to 60☌).This extends the operating life and provides better efficiency at continuous high pressures.įor optimal utilization of these motors, the following is recommended: The Rolortorc™ gear set has rollers added to the outer ring which act as roller bearings, reducing friction and wear and increasing mechanical efficiency. ![]() Max Flow: 18.49 gpm (cont) / 22.45 gpm (int)Ĭlick here to view the manufacturer's catalog information on the BMER-2 Series of motors.Technical Specifications for BMER-2-200-FS-SW-S: The BMER-2 series of motors (upgraded from BMER-1) offers a Rolortorc™ gear set with high speed distribution flow and high pressure. Tapered roller bearings on the output shaft permit high axial and radial forces offering a smooth operation during low pressure start up and high pressure operation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |